Hosokawa Alpine is highlighting its grinding and classification technology for recovered carbon black (rCB) at Powtech TechnoPharm 2026, taking place from 29 September to 1 October at the Nuremberg Exhibition Centre
According to Hosokawa Alpine, quality requirements for rCB are increasing as the material, produced through the pyrolysis of end-of-life tyres, moves towards more demanding applications. After pyrolysis, further processing is required to achieve defined material properties, with grinding and classification playing an important role in controlling fineness and particle size distribution.
“The required specification for recovered carbon black is largely determined by the comminution technology used. Grinding and classifying technology plays a key role, particularly when high fineness and narrow particle size distributions are required,” explains Thomas Anlauf, Head of Sales Chemicals Powder & Particle Processing at Hosokawa Alpine.
For rCB processing, Hosokawa Alpine uses its TDG fluidised-bed opposed jet mill with an integrated high-performance dynamic classifier. The system can produce material with a fineness of d₉₇= 4 to 40 µm, with the final fineness adjusted through the speed of the classifier wheel, enabling precise control of the upper particle size while maintaining high throughput, including when producing very fine material.
Hosokawa Alpine has also expanded its range with the TDG 1250 mill size, developed for low-bulk-density materials such as rCB and synthetic amorphous silica, with throughput rates of up to 5 tonnes per hour at fineness levels d₉₇<10 µm.
The new mill complements the TDG 800, which has production capacities of around 1.5–2.5 tonnes per hour. Hosokawa Alpine said the higher capacity of the TDG 1250 can, in some cases, reduce the need for several parallel grinding lines, potentially lowering capital and operating costs.
Together with other companies within the Hosokawa Micron Group, Hosokawa Alpine also provides pelletising and drying solutions, as well as systems for conveying, storing, dosing and weighing the material.







